There's an access problem almost nobody puts in the RFP, and it can wreck your opening just like a dead scanner: people don't know which gate to go to.
I've seen it many times. The system works, the staff is in position, the lanes are set up right. And still, twenty minutes after doors open there's a huge line at Gate 2 and Gate 4 is almost empty. Nothing failed technically. The attendee arrived, looked around, and followed the longest line, which is what anyone does.
What's really going on
People don't read. That's the first thing you have to accept. They arrive with a phone in their hand, with friends, with the noise of the venue around them, and they decide in three seconds. If the sign says "Access Field A and B, North Stand, Press and Accredited" in small letters, nobody read it.
On top of that, the ticket usually says one thing and the venue says another. The ticket says "Gate 3," and on site Gate 3 is an unnumbered door that the production team calls "the side one." If we understand each other inside but the sign outside says something else, we've already lost.
The three mistakes we see most
Signs at eye level, but behind the crowd. Once the line has formed, the sign gets hidden by the people at the front. It has to go up high, be visible from far away, and be repeated before the point where the line forms, not at the gate itself.
No single naming system. If the ticketing platform calls it "North Entrance," the confirmation email says "Access 1," and the sign says "Gate A," you have three languages for one gate. Before the event, sit down with ticketing, production, and whoever makes the signage, and set ONE name per access point. Then use it the same way everywhere.
Treating signage as decoration. It gets ordered when everything else is closed, designed for the brand and not for use. It looks good and it's useless. An access sign is operational information: big color, a single word or letter, an arrow, and nothing else.
How to avoid it
What we do, in order:
- Walk the attendee's route from where they get off the transport, not from the gate. You have to put yourself in the shoes of someone who has never been there. That's where you see the points where people hesitate.
- Mark every decision point: forks, street crossings, the spot where people gather to wait. Signage goes there, and so does a person in a vest to point the way.
- Use color as well as text. One gate, one color, and that color also shows up on the ticket or in the pre-event communication. It works even for someone who doesn't speak the language or didn't bring their glasses.
- Put orientation staff before the turnstiles, separate from the control staff. Their only job is to answer "where do I go in" and move people toward the gates with shorter lines. They don't scan anything.
- Test at night if the event is at night. A sign that looks perfect at three in the afternoon may be unreadable under the venue's real lighting.
What to ask your vendor
If you're putting together an RFP or evaluating proposals, ask these questions and pay attention to how they answer:
- Who defines the name of each access point, and how do you guarantee it's the same on the ticket, the email, and the sign?
- Is there a site walkthrough from the transport stop to the gate, or does the work only cover the gate?
- Is orientation staff included, separate from control staff?
- Who approves the signage, and by what criteria, brand or operational?
- What happens if, halfway through opening, people need to be redirected from one gate to another? Are there mobile signs, a megaphone, someone with the authority to make that call?
If the answer to the last one is "we'll figure it out on the spot," you already know what's going to happen.
What stayed with me
Once, at a large access point, we fixed a line that wasn't moving without touching a single turnstile. We put two people in vests twenty meters back, sending people to the gate that was free. In ten minutes everything evened out. The system was never the problem. The information was.
Access control works like the rest of operations: what you don't see on the floor plan, you see at the gate. And at the gate there's no time left to fix anything.
If you're putting together an event and want to review how people reach your entrances, write to us and we'll go through it properly, walking the venue.